UNS N06200 Hastelloy C-2000 DIN 2.4675 corrosion resistant alloy plate sheet

1.bar wire dia:5.5~1000mm; 2.pipe tube outdia:6~3500mm; 3.plate coil wideth:10~2000mm; 4.strip coil thickness:0.3~16mm.

           1.this kind of alloy can resist  the corrosion of sulfuric acid, hydrochloric acid and hydrofluoric acid which have oxidability, reducibility

and it can be used for making the reactor and heat exchanger and valve and pump which used in chemical equipment

 .

  

2. Typical analysis in percent

Ni:balance,Mo:15.0-17.0,Cr:22~24,W:/,Fe:3max,Co:2.0 max,Cu:1.3-1.9, Mn:0.50 max., ,Si:0.08 max,C:0.01 max ,Cb:1.5 max, P:0.025 max ,S:0.010 max

About our company and product

We are a professional technological company which is specialized in the research, management and development of special metal materials. Our company has 7 senior engineers and has strong technical development strength, with a good cooperation relationship with ChangGang, a well-known enterprise. Our main products are corrosion resisting alloy, high-temperature alloy, stainless steel, steel industrial moulds, special material steel bars, planks, pipes, silk and forgings. Our products are widely used in petroleum, chemical industry, chemical fiber, fertilizers, machinery, equipment and instruments, aerospace, energy industry, etc. We can provide rods, plates, tubes, silk, belt, forgings, etc. of the following materials. 1). Corrosion Resisting Alloy: Monel400, Inconel600, Inconel625, Inconel690, Incoloy800 (H), Incoloy825, HastelloyB, HastelloyB2, HastelloyC-4, HastelloyC-22, HastelloyC-276 and HastelloyG30 2). High-Temperature Alloy: GH30, GH39, GH33 (A), GH37, GH44, GH128, GH132 (A-286), GH145 (Inconel750) and GH169 (Inconel718) 3). Stainless Steel: 1Cr17Ni2 (431), 0~1Cr25Ni20Si2 (310S), 3Cr24Ni7SiNRe, 3Cr17Ni7Mo2N (318), 0Cr17Ni17Mo7Cu2, 00Cr25Ni22Mo2N (U2), 00Cr20Ni24Si4Ti (C6L), 00Cr20Ni25Mo5Cu2 (904L), 0Cr12Ni25Mo3Cu3Si2Nb (941), 0Cr20Ni26Mo3Cu3Si2Nb (RS-2), 0Cr17Ni4Cu4Nb (17-4PH), 0Cr15Ni5Cu2Nb (15-5PH), 0Cr15Ni7Mo2Al (15-7Ph), 0Cr13Ni8Mo2Al (Ph13-8Mo), S45500 (XM-16), S45000 (XM-25), 0Cr26Ni5Mo2 (329J1), 00Cr22Ni5Mo2N (2205) and Y0Cr17(430F) 4). Steel Industrial Moulds: Cr12MoV, Cr12Mo1V1 (D2), 4Cr5MoSiV1 (H13), NAK80 and 3Cr2Mo (P20) 5). A-Structural Steel: 12Cr1MoV, 12CrNi3A, 34CrNi3Mo, 45CrNiMoVA, 40CrNiMoA, 5CrNiMo, 20Cr2Ni4A and FD-1 6). Maraging Steel: 18Ni, 20Ni and 25Ni 7. Cold Rolled Silicon Steel with grain orientation: F30Q130

----------------------------------------------------------------------------------------------------------------------

3. About our service

· cargo track service during transporting

· feedback service after cargo is loaded on board

· flexible terms of payment by T/T 

· big discount for repeat customers

· regular exchange of view on problems and suggestions during using.

· bundles, seaworthy packing or as per customer's requirement.

· Serface treatment :Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting as per your requirement